change dell openmanage switch administrator password

The switch will reboot and you'll be able to connect to the full web interface.

Log in as “admin” ( not “Admin”) with no password, check the box to enable the connection, select the radio button to use the default password, and Apply Changes. According to the support rep, the CLI is disabled until you log in via the web interface, so you don't really need a COM connectionīasically all you need to do is set a computer IP address to 192.168.2.100, Subnet 255.255.255.0, plug the computer into the switch, and browse to. When I typed “enable” to start CLI mode, it told me the parameter was invalid (although no parameter should be required). When I put the switch into managed mode, I got a message telling me to continue setup through the EWS (Embedded Web Server), but not giving an IP address to connect to. I found it hard to believe that there was no way to set up the switch from a web browser, but I valiantly unwound the included COM cable and set to work.įact: After jumping through all the COM connection hoops, I could never get the command-line wizard to start.

As soon as the technician saw the 28xx model number, he knew why I was calling he said about 75% of the calls on these models are due to the incorrect documentation.įiction: the Getting Started Guide says, “The initial device configuration is through the Serial port.” It goes on to explain an elaborate procedure for connecting to the switch via the COM port using a VT100 emulator and setting up the switch using a command-line wizard. I finally gave up and called Dell Support. The switch has some great features for the price, but the setup instructions are very wrong. I recently purchased a Dell PowerConnect 2824 switch for use at a client site.

Change dell openmanage switch administrator password